Kids handlebar for Ninebot G30/G2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Kids handlebar for Ninebot G30 Series and Ninebot G2 Scooters.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 322
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
All the handelbars for kids on the market did not suit me, so I decided to create my own. I printed out my handelbar holder from PET with 100% infill, because it is quite durable. Before using it, I conducted tests. I put the holder on the horizontal bar and hung on it, it withstood my 85kg with ease, so it will definitely withstand the child. The pads for the handelbar holder are printed from soft TPU, this will ensure an optimal fit of the holder to the steering tube.
I strongly do not recommend using PLA for printing. After printing, check the strength by hanging on the holder like me, just keep your hands closer to the middle so as not to break the crossbar. When tightening the screws, use the principle of reasonable sufficiency, but not too weakly. This kids handelbar has been used for more than two months and there have been no problems.
The author is not responsible for the use of this device. Everything you do, you do at your own risk.
To build it, you will need:
- Steering crossbar from Xiaomi 365
- Grips from Xiaomi 365
- 4x Screws M6x100mm
- 8x Washers M6x12mm
- 4x M6 Nylon Lock Nuts (To tighten the nuts, it is most convenient to use an end head)
- Printed parts