Drill and Driver Fishing Line Despooler
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remove fishing lines from reels quickly with this print, a drill/driver and a toilet paper center tube
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 297
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Quickly strip old fishing line from a reel using a drill or impact driver and the cardboard tube from a toilet paper roll.
The standard ¼-inch hex shaft fits directly into a driver’s quick-change chuck or a conventional drill chuck. The cylindrical mandrel slides partway into the toilet paper tube and grips it tightly enough to wind up old line for easy disposal.
A small notch at the base of the mandrel captures the end of the fishing line beneath the tube, so there is no need for tape or knots.
How to use it
Put the ¼-inch hex shaft into your drill or impact driver.
Feed the end of the fishing line through the notch at the base.
Slide an empty toilet paper tube onto the mandrel, trapping the line underneath it.
Hold the rod or reel securely.
Run the drill or driver slowly until the reel is empty.
Pull off the tube and dispose of the old line responsibly.
Features
Standard ¼-inch hex shaft
Works with drills and quick-change impact drivers
Uses an ordinary toilet paper tube
Built-in notch captures the end of the line
No tape, knots, or extra hardware required
One-piece print
Start slowly. A tube full of fishing line can become unbalanced if the line winds heavily toward one side.