DUMMY 13 Ladder_V1b15

Nov. 12, 2024 V1 Build 15:

• First release

The Rolling Stones used to sing a famous song:
“You can't always get what you want”

But sometimes a ladder can help with that ;)

The provided 3MF file can be used with:

• Orca Slicer/Bambu Studio: Geometries , filament, AMS and settings
• Prusa Slicer:  At least the geometries
• Others: May or may not work. Please do not expect any support for other software

In principle:

• PLA
• Nozzle: 0.4mm 
• Layer height:  Default 0.16mm
• Brim/Supports: NO

Assemble the rear part and make sure that a piece of filament can move freely in the hinge hole. The pins have to sit flush. Note the direction of the side parts
The rounded side of the steps must later be at the top. The top step is compatible with my “Acrobatics pedestal” pins. First glue in the top and bottom steps. Then you can glue in the other steps. Note the direction of the side parts
Now put the two parts together and connect them with a piece of filament. Fix the outer sides with glue and cut the filament accordingly.