Ender 5 X MGN12 detachable toolhead (3D print, laser and drill)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a rail carriage with three possible toolheads for an Ender 5 with an MGN12 rail on the X axis.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 393
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
This is meant for an Ender 5 (Pro) and may fit on the Ender5 Plus and S1 model as well though those were not my target for design.
The purpose was to enable the Ender5 to do PCB manufacturing as well as 3D printing. For PCB manufacturing I use a cheap small hand drill and a 10W lasercutter to etch/drill copper clad boards.
This mod assumes using an MGN12 rail on at least the X axis as milling/drilling with V-slot wheels doesnt work well (I've tried) and for the 3D printer toolhead it assumes usage of an Orbiter 1.5 extruder and the stock fan shroud/hotend combination.
The rail carriage is attached to the MGN12 slider and this contains four holes meant for M3x5x6 threaded inserts, two in the front and two on the bottom for stability. I have found that you dont need to fasten the bottom ones for 3D printing and lasering.
Removing a toolhead can be done by removing four screws and simply placing a different one on it.
If you want to edit the design for your own toolhead or use a different extruder the FreeCAD design file is added. I made it by importing a model of an Ender 5 and drawing on top of that. I cannot share those models since they do not belong to me but you should be able to find them on GrabCAD.
Materials needed:
M3x5x6mm threaded inserts
2 M3x40 countersunk
2 M3x8 countersunk
M3 screws for BLTouch, hotend, fan shroud. You can probably use the originals.