Angel addon for picture frame
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made this angel decoration to add to a picture frame as a gift.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 63
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Public Domain
This is made to fit a picture frame measuring 211x160x25.4mm.
Wings are meant to be printed upside down. No support.
The head is to be printed in 2 colours, with two filament changes. In Cura: layers 138 and 161.
There's a priming tower included, so make sure that the layers starts there. It helps to prime the nozzle after the filament changes.
Supports are necessary. The bottom piece of the back can then be removed by cuttin the little tabs. This is meant to help with support consistency.
For a better internal support of the facial features, I added a support block, 0.2 thick at Z 31mm with settings at overlap: bottom layers 4, top layer 0, infill 100%. That allowed to have a full layer undernearth facial features like the mouth.
The model “Face - Cura project” includes these settings.