1 / 5
Tesla M40 roof mount for Fractal North case — zdjęcie 1
1 / 5

Tesla M40 roof mount for Fractal North case

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a case mount for the NVIDIA Tesla M40 compute GPU, it's intended to be used with the fractal north case. This…

Ocena
0 / 5
Polubienia
0
Pobrania
6
Wydruki
0
Wyświetlenia
485
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Share Alike

This is a case mount for the NVIDIA Tesla M40 compute GPU, it's intended to be used with the fractal north case. This design is not at all perfect, the diverter does not fit flush with the card, and the screw holes are slightly too small. but it will do the job. If you show interest I'll have no alternative other than to update the part!

It is intended to be used with a PCIE riser cable, the one I used was a 600mm one to be on the safe side, however you could likely go with one much shorter, and go directly underneath existing GPUs and CPU heatsinks. I didn't want to completely disassemble my PC though.

Its important to note that the roof mounted GPU almost NEEDS to be mounted in this exact orientation. I was originally going to design my own input fan mount, however that proved to be much more involved that I was hoping for it to be for such a simple project like this, so I used this existing one instead. https://www.thingiverse.com/thing:4381706

It works quite well and doesn't interfere with anything.

How I Designed This

Category: Computer

Tagi