1 / 3
Rotating Organizer Octogonal - Bath - Desk
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
organizer for different things
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 266
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (16)Powiązane
Hello
I created yet another rotating organizer for different things in different rooms.
you will have to print both pats and also needs a 608 ballbearing
The ballbearing fits quite tight, I used a rubber hammer to put it into the upper part. Then stick the bottom part in. I recommend to only assemble it once since the bottom parts wears out when you take it out again and won't fit that good anymore.
the assembly coppied out of my other model:
- Put the Ball bearing into the top piece. it fits quite tight, I used a rubber hammer to gently put it in place. Make sure its completely flat or the top piece will scratch the bottom
- put the bottom piece on, this also fits tightly. Put it on an even surface and gently press from the top.
let me know if you have more ideas for organizers and improvements for the ones I already uploaded.
have fun printing