Qidi X Plus 4 Poop Catcher
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my solution for a printer poop catcher on the Qidi plus4. Requires 2x m3x12mm wood style screws.
- Ocena
- 5 / 5
- Polubienia
- 48
- Pobrania
- 684
- Wydruki
- 0
- Wyświetlenia
- 2237
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
I wanted a nice solution to catch the printer poop on my new Qidi Plus4 and this is what I came up with. Hope you like it and maybe it can prove useful for you too!
I used generic pla and the 0.20mm strength profile on my Qidi. Painted supports in the window on the slide and had to replace the two factory screws with 2 M3x12mm wood style screws.
I also added a hole on the back of the slide to ease access to the one screw after printing mine and realizing how big a pain it was to tighten that screw up.
Place the bottom of the catcher/bucket on the build plate, no supports needed on this part.
Place the bottom of the slide on the build plate, and manually paint standard supports for the top bar of the window.
I may try a version without the top bar that doesn't require any supports. Let me know if that is something you are interested in. Let me know if you like it, or have any suggestions to improve it. I will try to keep up with this and make modifications if needed. Thanks