1 / 1
J and J Powder Bottle Screw On Cap — zdjęcie 1

J and J Powder Bottle Screw On Cap

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

J&J powder bottles as of late seemed to keep spilling inside my bags. This gives additional containment

Ocena
0 / 5
Polubienia
2
Pobrania
15
Wydruki
0
Wyświetlenia
86
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Bathroom
Licencja
Creative Commons — Attribution — Noncommercial

I designed this to sit on top of the normal cap. The cap is intended to hold tightly against the rotational cap and hold in any leaked powder. Better contained or at least heavily mitigated is better than loosely spilling.

In addition to the cap there is a "left" and "right" collar that the cap screws into. Just hold the two halves around the neck of the bottle and then screw the cap on.

Note if there's any previous spillage inside the cap you may want to rinse it off and dry with a towel since the powder will prevent the lid from screwing on tightly.

Be sure to print Bottom Pattern Initial Layer as Concentric!

The 22oz models appear to also fit 15oz bottles as well!