Insta360 Flow/Flow Pro Quadlock magnetic head
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made my own design for my insta 360 flow to make it possible, use my phone with my quadlock phone case.
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 40
- Wydruki
- 1
- Wyświetlenia
- 864
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Prints:
-I printed with Prusa MK3S+ with Prusa Petg, 30% infill, support from bed.
Other parts:
-5 pcs D4,9mm x 3 mm neodymium magnets
-2 pcs M3x6 screw with thin head
-2 pcs M3 nut
To do:
-Print, place the bigger flat surfaces onto the bed.
-Insert the 5 magnets into the bracket part as you can see on the pictures. Cause the insta360 make a fast positioning even withouth the phone is mounted, I had to leave two magnets places empty, I think the reason is some kind of Hall sensors. With 5 magnets it is working really well. You have to place the magnets in the right side to reach the good polarity, place and try, the insta360 should pull the bracket in every contact spots.
-Place the two nuts inside the quadlock head
-Remove a little (0,3-0,8mm) material from the screws
-Fix the two parts with the screws together
-Use with fun