Metric Drillholder / Bohrerhalter für Wandmontage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Drillbit Holder für pointed Metric Wood-Drills.- sizes from 3mm to 10mm including 3.5 and 4.5 as needed for furniture…
- Ocena
- 5 / 5
- Polubienia
- 44
- Pobrania
- 375
- Wydruki
- 2
- Wyświetlenia
- 1656
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Drillbit Holder für pointed Metric Wood-Drills.- sizes from 3mm to 10mm including 3.5 and 4.5 as needed for furniture building.
Designed to be screwed to the tool wall
Bohrerhalter für metrische Holzbohrer. Alle gebräuchlichen Größen für den Möbelbau von 3mm bis 10mm einschließlich der Zwischengrößen 3,5 und 4,5mm
Gedacht für Wandmontage über zwei Senkkopfschrauben 4*40 o.ä. Schrauben
Print instructions
Category: Tool Holders & Boxes Print Settings
Model should be printed in an upright position - holes on Top.
Printing with 3 perimeter shells and 4 top-layers for best results recommended
Resolution: 0,2
Infill: 15%
Notes:
Prints in PLA or any other material.