1 / 4
2mm Greek-style hoplite phalanx — zdjęcie 1
1 / 4

2mm Greek-style hoplite phalanx

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A Greek-style phalanx of 180 hoplites

Ocena
0 / 5
Polubienia
7
Pobrania
34
Wydruki
0
Wyświetlenia
322
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Board Games
Licencja
Creative Commons — Attribution

A Greek-style phalanx of 180 hoplites (don't count them... there's actually like 480 spear tips in this model but trust me it looked better this way than with way chunkier spears) in formation armed with long spears and large round shields (aspis). Created this for my own fantasy world but obviously would be appropriate for a historical wargame. It's small enough to use a domino as a base if you don't mind the spears hanging over (I think it looks cool).

I printed them on my AnyCubic photon mono x2.

You can print it flat on the print plate, but you'll probably want supports under the spears- unfortunately that will cause the resin to mass under the spears and you'll wind up with a bit of a glob of resin there. No biggie if you're putting it on a base that's big enough to cover the entire thing, I'm not though, the spears stick out past my the domino I'm using for a base so it would be very visible. Thus I printed it all on supports. Your call.

For my one tester I used an off brand bone colour for the tunics (and skin), vallejo nocturnal red for the shield, reaper msp muddy brown for the spears and army painter weapon bronze for the spear tips and helmets. For the other tester I used reaper blade steel for the tips and helmets and armour and I think speedpaint 2.0 satchel brown for the spears. Both styles work quite well depending if you want a dark tone or a light one.

Tagi