HSW Scraper and Clippers Holder (with and without brush hook)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A minimalist design that maximizes your HSW utility by stacking your side cutters and scraper together!
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 86
- Wydruki
- 0
- Wyświetlenia
- 343
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
2026 Update: It came to my attention that some of the allowances I left for printer error are no longer needed or helpful, I have updated the models to reflect this. I only updated the single-peg models as they are the most efficient. The pegs now taper so that the further in you push them the tighter they become.
I wanted to add M4NU's tweezers to my HSW wall but I needed to reimagine some of the use of space first. I realized that the space in front of my spatula holder was underutilized and rectified that. I think this design makes good use of space with an elegant and minimalist design that prints easily and without supports, though a brim or tabs may help with the end of the arms.
The featured version has two pegs and thus requires two hollow inserts but I have also added a single peg version, so you can fit it wherever works for you.
I have not printed the model that has the brush hook or either of the single-peg models, so please let me know if there are any problems.
Please note that this is designed to fit a 38mm scraper. The double peg version has a little extra room but the single peg version is exactly 38mm wide.
Please don't forget to post a make when you're done! :)