1 / 2
AsteraBox ART7 Wifi Wall Enclosure with PSU
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Wallholder Enclosure for Astera ART7 with space for 5V PSU and Neurik Connectors.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 493
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This Enclosure fitts an AsteraBox (ART7) Wifi, a 5V Powersuply and two neutrik connectors. The Enclosure keeps all buttons accessible.
Partslist:
- 12x Heat set insert M3
- 10x M3x10 countersink screw
- 2x M3x6 Screw
- 2x countersink woodscrew (for Wallmouting)
- Meanwell APV-16-5 PSU (5V 2,6A)
- Neutrik Powercon or True1 Input socket
- Neutrik XLR 3pin oder 5-pin male socket
- 2x Flat Crimp connector for Powercon socket
- Shrink-wrap tubing
Disclaimer: Wiring the PSU and Socets involves working with hazardous voltages! Electricity can cause injuries, Fires and Death! Don't replicate my work, if your not certified to work on electronics! I don't take any responsibilitys for your actions and resulting injuries!
Printing:
- Needs no supports
- Printed in Prusament PC-Blend CF
- Printed on Prusa MK4 with 0.2mm speed profile. I increased the wall thickness to 5, and the infill to 15% Gyroid, because the enclosure is mounted in a high trafic area on stage. You pobably don't need ist that beefy.