1 / 6
Ugly card holder wallet (DIY Ridge Wallet)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Plates to make a card wallet
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 422
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Make your own wallet, with these partsm screws, elastic bands and aluminium foil.
It might be a little bit ugly, but it works fine for me.
Top layer on the A-parts use Hilbert curve
You need:
16x Countersink M3x6 (you can probably make it with only 4 at each side)
Elastic band
- Needle and thread or a sowing machine can be used to sow the strips together to make the t shape on each side that sits in the groove of the B-parts.
Aluminium foil to make the RFID blocker.
- Take 2 small strips and glue them in the groove of the B-parts