Outdoor sink
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A sink for outdoor use. This is for a cabin that lacks running water. The plumbing consists of a manual-refill wall…
- Ocena
- 5 / 5
- Polubienia
- 73
- Pobrania
- 163
- Wydruki
- 1
- Wyświetlenia
- 1234
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
A sink for outdoor use. This is for a cabin that lacks running water. The plumbing consists of a manual-refill wall mounted bucket and some garden hose.
- Required build plate size 24 x 18 cm
- Drain hole with 1/2 inch BSP plumbing thread
- Strainer easily removable
Originally published in 2019: https://www.thingiverse.com/thing:3712408
Print Settings
Supports:
No
Resolution:
0.20
Infill:
20% Gyroid
Filament: Extrudr PETG Bronze
Notes:
The overhang is quite steep and didn't print that well in PETG with my settings. I didn't bother to change and reprint as it isn't that visible. If you find printing overhangs with PETG challenging, and you want it to look good, consider using some supports.
Category: Outdoor & Garden