Rad Radius Gauge - the RadGauge - With Companion App
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A rad radius gauge for measuring radii of around 40 mm and bigger. Use the free web app calculator to calculate the…
- Ocena
- 4,667 / 5
- Polubienia
- 71
- Pobrania
- 295
- Wydruki
- 9
- Wyświetlenia
- 3034
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A rad radius gauge for measuring radii of around 40 mm and bigger. Use the free web app calculator to calculate the result, it's super easy!
UPDATE 2: Added versions without the shelf in the hole. Now it should be able to take calipers that has a vertical bracket across the depth probe rather than a screw. This is not really optimal, as the lack of the shelf will allow for some wobble, but you'll just have to hold it in place while measuring.
UPDATE 1: Added a 30 mm version for measuring smaller radii.
The companion app and instructions for use:
https://subsite.github.io/rad/
Now this is made to fit my digital calipers, which is pretty standard. The main shaft is around 16 mm x 4 mm, and it has a screw to keep the depth probe in place. To test if it fits, you can first print the small test piece, and then the complete model if it fits. A bit loose is ok, it's easy to keep in place while measuring.
If it's too tight vertically (z-axis), you could try to scale the z-axis in your slicer. Don't scale the whole thing, or the measuring distance will be off.
It's probably pretty easy for me to make another version for a different set of calipers, please let me know, and I'll see what I can do!
Originally published in 2018: https://www.thingiverse.com/thing:2811444
Please post a Make if you make this!
Notes:
You might want to slow down you print speed for better accuracy.
Category: Tools