1 / 4
Windshield washer fluid funnel for VW / Audi / Skoda / Seat — zdjęcie 1
1 / 4

Windshield washer fluid funnel for VW / Audi / Skoda / Seat

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Refilling windshield washer fluid can sometimes be a mess, but not anymore!

Ocena
4,8 / 5
Polubienia
113
Pobrania
681
Wydruki
5
Wyświetlenia
2758
Oceny
5

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Share Alike

Introduction

Refilling windshield washer fluid can sometimes be a mess, but not anymore!  
This funnel is designed to be used when refilling windshield washer fluid with minimum waste of washer fluid.  

Features

Handle: This funnel has a handle for easy holding.
Air: This funnel features a little hole, allowing air to flow out of the funnel in case the fluid should be rising.

Compatibility  

This funnel is made to fit cars from the Volkswagen Group such as Volkswagen, Audi, Skoda and Seat.  
Tested on Seat Ibiza and Seat Arona.  

Printing…

This model can be printed as oriented in the attached .stl file.  
If the funnel needs to look perfect, then supports would be recommended, however support is not necessary at all, as I printed it without support.  
Brim or good bed adhesion is recommended.  

Happy printing!

As always, be sure to ask any questions you might have, leave a like and post a make :D

Tagi