Sheep holder for mk4/s
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder for the sheep model by Prusa Research for Prusa mk4/s.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 67
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
What does it do?
This part for the prusa mk4/s 3d printer solves the problem of a sheep possibly falling into your print. If you like the Prusa Research sheep model sitting on your printer, you can glue it to this sheep holder and snap it onto your printer. Thanks to this, your sheep cannot fall on your print, which could be destroyed by the sheep.
Print settings :
From my experience, I recommend printing at 101% scale. Depending on how the sheep holder will hold on the printer, you can increase or decrease the scale by 1%. I personally used the settings: 0.20 mm layer height, 20% infill, no supports.
How to use it ?
As you can see in the picture, this sheep holder belongs to the upper left part of the printer. Glue your sheep model onto it and snap onto the top left of the printer. Press the edges of the sheep holder so that it sits well on the printer. Done! Now your sheep is safe and can not fall.
Here you can download the sheep model from Prusa Research:
https://www.printables.com/model/13787-sheep