STC-1000 easier print
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The original was totally unprintable on my printer, largely due to the screw tabs floating in mid air.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 387
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
The original was totally unprintable on my printer, largely due to the screw tabs floating in mid air and being printed with the right extruder then hit by the left one, but also the holes won't come out properly round if printed vertically.
So I cut a few layers off the bottom (only the feet) in PrusaSlicer and rotated the pieces so that they are flat on the build plate, also split the model in two so you don't have to.
It now needs some supports to print (see screenshots) but I have successfully printed both halves and it fits the STC-1000 perfectly.
Added a universal box generator remix too, not tested though.