Fun Pro FIVE Roller / scooter front: Spritzschutz / mudguard / fender
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I did not find any replacement parts on the internet. It is the large version of fun pro with the 200mm wheels
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 81
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Standard Digital File License
I re-constructed it based on the damaged original part (see pictures). It is 3D printer friendly by using chamfers instead of radii. It is larger than the original one, because the original one is a bit tiny in my opinion. 1:1 same mounting element (star-form) with same M6 screw. But it is more solid I would assume. I go into endurance-test with my kids Fun Pro FIVE scooter now. 100% infill print is recommended. I used PETG, but PLA should be fine as well.
Original Solid-Works file is attached (version 2024) as well as STEP.
Have fun (pro)! :-)