1 / 3
Version 2 of my case for the ZachTek CWflea transmitter. — zdjęcie 1
1 / 3

Version 2 of my case for the ZachTek CWflea transmitter.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A much better case for the little TX I co-designed with Harry over at ZachTek.

Ocena
0 / 5
Polubienia
0
Pobrania
12
Wydruki
0
Wyświetlenia
79
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution

 

This is version 2 of my case for the little transmitter I co-developed with Harry over at ZachTek. The little button knobs are optional if your printer can handle the small square hole. The buttons can be clicked through the holes without the knobs. They just make it look nicer.
It should be a straightforward print. I'd suggest 0.2 mm or less layer height.

You will need four m3x8 mm screws.

Tagi