Super Mario warp pipe smartwatch charger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Super Mario warp pipe smartwatch charger for Samsung galaxy watch 4 (for now)
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 495
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
For the plumbing contest - It won't be more plumbing than this!
The perfect way to charge your companion smart watch after a long day of plumbing!
I have been looking for a smartwatch charger stand thingy for a while but I have failed to find one. So I made my own! Based on Super Mario's famous warp pipe!
Print settings
Regular
In the regular version I flipped both the pipe and base upside down to get a nice surface. You need support for the inside of the pipe and the hole for the pipe on the base if you print them upside down.
Layer height: 0.2
Infill: 5%, 3D Honeycomb
Support: Yes
45
In the 45 version I printed the base with 15% infill 28,4mm (first layer of cubes) and the rest with 5% infill. I used 3D Honeycomb.
Layer height: 0.2
Infill: 15% 28.4mm, 5% rest, 3D Honeycomb
Support: Pipe Yes, Base No
On the regular version I put a weight inside the pipe ( a rock my daughter found ) so it would stay put on the table when I lifted the smartwatch. But I think with some more infill you can make it weigh down on its own.
Assemble :
- Print!
- Insert cable in the pipe.
- Align the cable with the hatch inside the pipe.
- Press down the charger pad. Its a tight fit, so use your strong hand! But be careful because the hatch for the cable is a narrow turn, and might damage the cable.
- Insert the cable in the hole in the base, and feed the cable.
- Insert the pipe in the base.
- And you are done!
Improvements
- Create more versions of the pipe for other smartwatch chargers.