1 / 8
Christmas Tree Bobblehead v3
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Completely redesigned v3 includes better spring and uses less material.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 72
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Introducing the Christmas tree bobblehead v3!
Completely redesigned to use less material, print faster, and has a spring specifically made for this project instead of one that somewhat works.
Print directions:
- .3mm layer height
- Your usual settings should be fine for everything except the two tree pieces which are:
- 0%infill, 0 top shells
- On the bottom half of the tree 0 bottoms layers.
How to assemble:
1.Insert Spring into top half of tree.
2. Use a small amount of glue to attach the bottom of the tree to the top.
3.Insert the spring into the base.
4.Glue the star on to the top of the tree.
Filaments used:
Pantone PLA Spring leaf and Tropical turquoise, XYZprinting Yellow.