Zero G Mercury Syph3rd Enclosure Door Stop and Handles
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mercury 1.1 conversion with Syph3rd's Enclosure from Discord Community. I made Handles and Door stops for this project.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 621
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
I have a Mercury 1.1 conversion on my Ender 5 pro. I added Syph3rd's Enclosure from Discord community. Love the whole setup but an issue I had was with the front doors not able to stop from going inwards. I just quickly designed a stopper for the top and bottom and a set of handles.
Top piece just needs to be centered and glued in (print 1) Can be printed with slot facing down
Bottom piece you will need 2 x M5x16 bolts and 2 x M5 t-nuts (print 2 - one for each door)
Handle you will need 4 x m4x6 heat inserts and 4 x M4x6 bolts (print 2 - one for each door)
No supports needed