Fastest XY Accuracy Calibration Orca Slicer (2 grams)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This quick calibration model is designed specifically to help 3D printer users fine-tune accuracy and hole compensation
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 61
- Wydruki
- 0
- Wyświetlenia
- 1029
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Why It’s Useful:
Accurate printing is essential for functional parts, especially when precise dimensions and proper hole sizes are required for assembly or fitting components. This model is ideal for checking your printer’s accuracy, identifying any scaling adjustments needed, and dialing in hole compensation settings for tighter or looser fits as desired.
Printing Details:
- Recommended Layer Height: 0.2 mm for a balance of speed and detail
- Filament Use: Minimal 2 grams (designed for efficient use of material)
- Filament Type: Works with PLA, PETG, ABS, or any standard material
Usage Instructions:
After printing, take a 2mm drill bit and check each hole to see which one fits snugly. This test allows you to evaluate how accurately your printer is creating small internal diameters. Based on the results, adjust your slicer’s hole compensation settings until you achieve the correct fit with the 2mm drill bit.
Benefits:
By using this calibration model, you can quickly and easily refine your printer’s dimensional accuracy, ensuring that your prints meet exact specifications for both outer and inner measurements.
Tags: #calibration #accuracy #holecompensation #drillbittest #3dprinting