Light Globe Replacement for 3.25 inch ceiling fixture
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 6" globe that goes into the ceiling light fixtures from the early 80s. The "socket" that the opening of the…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 355
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
This is a 6" globe that goes into the ceiling light fixtures from the early 80s. The "socket" that the opening of the globe fits into is about 3.25".
We had 3 of these made of frosted glass when we moved in and they are all broken. Decided to have a go at making my own. Looks like the glass ones are available on Amazon: https://www.amazon.ca/6-Inch-White-Glass-Globe-Opening/dp/B001EBHCY6
The onshape file is here in case you want to remix: https://cad.onshape.com/documents/3997dbdc0aa01270d2bed418/w/a7a1ad4c9486ea1be73e66ca/e/db4d87b8681eebb9b63dcdbc?renderMode=0&uiState=6736808f78cff512c00130b9
Printing it is actually a bit tricky. I printed with the opening on the print bed with a brim and no supports. In Bambu studio, I used variable layer height to get thin layers in the most overhung sections to prevent loops getting printed in midair. I also used fuzzy skin to scatter the light as much as possible. The bottom of the sphere (which printed last) didn't come out great - it barely succeeded and has some weird artifacts and holes, but it's good enough. It looks great when it is lit up.
I got vertical line patterns in the fuzzy skin which is apparently an issue with the orca slicer not producing truly random fuzz https://github.com/SoftFever/OrcaSlicer/issues/6228 but it looks deliberate so I'm fine with it.
Print Settings
Printer Brand:
Bambu Lab
Printer:
Bambu X1C
No
Supports:
No
Dynamic
Infill:
None
Category: Replacement Parts