Beelink Mini S12 case extender
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A relatively simple extension to increase the internal space of a Beelink Mini S12 mini pc
- Ocena
- 4,5 / 5
- Polubienia
- 9
- Pobrania
- 97
- Wydruki
- 1
- Wyświetlenia
- 989
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
I got one of these Beelink mini pcs to use for a plex server. It comes with an empty internal bay for a 2.5 inch hard drive, but there is extremely little clearance around it. The hard drive I wanted to add was apparently more rubenesque than they intended and the hard drive would hit the other components before the lid was fully closed. Therefore, I designed this extension to the case so everything would fit while still keeping everything contained and secure.
No supports or special slicer settings are required for printing. You will also need 4 M2 nuts and bolts. I used M2x8 screws, but you might be able to get by with M2x6. Use the original case screws to secure the extension to the case and then use the M2 nuts and screws to secure the lid to the extension.