Marvel Snap Human Torch Card
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial
Hi all, did some photoshopping and Hue Forge adjustments to create this Human Torch card. Art is from Kim Jacinto and Marvel Snap. I printed at 60% size, I think 100% size is too big. Remember to only scale on 2 axis. Lots of swapping on this one.
Hueforge instructions:
Print at 100% infill with a layer height of 0.2mm with a base layer of 0.16mm
The Model is 200x238.65mm in size
You may print at higher layer heights below the Min Depth of 0.56mm
The Max Depth is 5mm and the Actual Depth is 5.2mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA Anycubic Dazzling Blue Transmission Distance: 3.5
PLA Anycubic Bright Red Transmission Distance: 3.5
PLA Elegoo Orange Transmission Distance: 5
PLA Elegoo Black Transmission Distance: 0.6
PLA Anycubic Vibrant Yellow Transmission Distance: 5
This print uses 6 unique filaments
Swap Instructions:
Start with Black
At layer #7 (1.36mm) swap to Dazzling Blue
At layer #9 (1.76mm) swap to Bright Red
At layer #10 (1.96mm) swap to Orange
At layer #12 (2.36mm) swap to Black
At layer #13 (2.56mm) swap to Bright Red
At layer #19 (3.76mm) swap to Orange
At layer #21 (4.16mm) swap to Vibrant Yellow
At layer #24 (4.76mm) swap to Orange for the rest.