1 / 4
Electronic Enclosure with power on for Mean Well RS-25 all types
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Electronic Enclosure with "Power on" for Mean Well RS-25 all types with and without mounting system
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 199
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Electronic Enclosure with "Power on" for Mean Well RS-25 all types
You need 8 M3x5,7mm press inserts from Ruthex or similar providers, 4x M3x8mm screws and 4x M3x10mm Screws
No support needed. You can print it in PLA, ABS, ASA or PETG.
Printed with Creality K1 220 degree Celsius on Nozzle and 60 degree Celsius on Bed. Printed in Clear PLA