1 / 5
Sovol SV08 tool holder for top mounting (right or left-sided) — zdjęcie 1
1 / 5

Sovol SV08 tool holder for top mounting (right or left-sided)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A permanently mounted tool holder for the Sovol SV08 printer.

Ocena
5 / 5
Polubienia
30
Pobrania
241
Wydruki
2
Wyświetlenia
880
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a remix for Sovol SV08 of the original K1 toolholder from Smutje:

A permanently mounted tool holder for the Sovol SV08 printer to store the supplied tools, USB sticks and even calipers.

Only requires the removal of three panel screws. 
Can be reattached with three new M3x20mm screws. 

DO NOT USE LONGER SCREWS, IT MAY HIT THE GANTRY!
CHECK DISTANCE BETWEEN SCREW END AND GANTRY! 

Optional you can use the original shorter M3 screws for the enclosure if you melt in threaded inserts and screw from inside out.

Fits well on enclosed SV08, don't know how it fits without enclosure. 
Without enclosure maybe it needs a wider additional base plate to compensate missing enclosure wall?

Printed with PETG, without support, with autobrim. Infill 10%, 3 walls,..


 

Tagi