1 / 5
Fractal North Front AirDuct (HDD tray compatible)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed version that is compatible with a HDD tray mounted in the front position.
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 162
- Wydruki
- 1
- Wyświetlenia
- 1603
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 3)Remiksy (2)Kolekcje (30)Powiązane
Remixed version that is compatible with a HDD tray mounted in the front position. The original model was too tall.
I also made the side symmetrical with the front, added more chamfers for strenght and added magnets such that it mounts to the fan rail. Three magnets are sufficient for keeping it in place.
Print setting:
- Wall loops > 4
- Infill 25% (does not really matter)
- Print with front-facing side down
- Supports not needed.
- Use a brim.
- I had multiple detachments, resulting in crooked top sections.
- I eventually used bed adhesion and brim spacing of 0.
- Compatible magnets: 6x10x3mm
- Designed for a press-fit. Otherwise, use a bit of super glue.
Printed this on a Bambu Lab X1C with eSUN Matte PLA.