Radrunner Down Tube Waterbottle Cage and Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Waterbottle Cage for Radrunner bike that can be quickly removed by accompanying dovetail mount on Down Tube of the bike
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 178
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
I created a combinaton Water Bottle Cage and Dovetail Mount for the Radrunner bike. This is located on the two M5 screw mounts towards the middle bottom of the down tube of the Radrunner (see pictures if you are confused). You will need two M5 screws (I think I used M5x30).
The Water Bottle cage was made for the Takeya 700ml/24oz waterbottle (which has a diameter of 78mm). If your water bottle is larger than 78mm at the bottom, than this won't work. I did make this with standard Tumblers in mind (things like this) as we have a bunch of these around the house. If you have a Tumber that is 89mm/3.5" or less at the top, than this will work well as the top of it tapers out to accept these type of cups.
I printed this in PLA with 4 perimeters and it feels very strong. To cut down on supports, I painted then under the dovetail on the cage- I left the rest alone and mine turned out great.