Hexagon PC Vent Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Raised and perforated vent stand for decorating your computer!
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 72
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My partner wanted to put things on top of their computer to decorate it. However, they didn't want to block the airflow. So I designed this in order to create a ‘table’ of sorts that goes on top of your computer without blocking the vents.
I recommend using the .3mf file for the slicer settings! But if you want to do it yourself, what I recommend is:
- 3 Wall loops
- 0% infill within the hexagons
- 25% infill along the edges and down the legs
The mating connectors are quite tight, I lightly hammered them together with the back of a screwdriver and that connects the pieces as if they were one. Very tight, no glue, quite stable!
It uses around ~125g of plastic. I printed mine in BambuLab Matte Blue PLA.
Fits on the A1 mini.