Nut-bracket-thingy for a 2004 Chevrolet Astro's license plate lamp housing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Nut-bracket-thingy that holds the license plate lamp housing in the license plate holder on a 2004 Chevrolet Astro.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 116
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- BSD License
Quick little print to replace the original cheap mild steel… whatever they're called, nut-thingies that hold the license plate lamp housing into the license plate housing on my 2004 Chevrolet Astro, the originals having cleverly converted themselves into flakes of mixed iron oxide hydrate over the last twenty years. If you need these things, the photos should tell you exactly why. I wouldn't be surprised if the same license plate holder (and therefore these parts) applies to the entire Astro/Safari production run.
Prints shown are Prusament PETG Clear off my MK3S+ with an 0.6mm nozzle, oriented as seen in the photos. Supports needed on build plate only, total time for the pair should be well under twenty minutes.
Also available on Github: https://github.com/oldlaptop/license-plate-hardware-bracket