1 / 2
Scuba Tank Keychain
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
I had puchased something similar from a dive shop some years ago and ran across it recently and thought to model one up myself. Have printed it several times at various layer heights and after .2 made the threads a little tough to turn I went back and made adjustments so it will work with either .1 mm or .2 mm layer height. Built upright with no issues.
PLA Pro
.2mm or .1mm Layer height
Infill: 100%
Supports: None
Brim: Yes on the tank, but not on the cap