Board Game Bit Bowls - Stackable
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Highly stackable bit bowls.
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 161
- Wydruki
- 1
- Wyświetlenia
- 655
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial
I designed these with specific requirements in mind:
- Must be stackable
- Would be great if they are tightly stackable, for transport
- Must have pour spout
- Must be durable to throw in game bag
- Thus, the decently thick walls
- Must work with TPU
- So everything is rounded off
- Must look good
I feel like I achieved all of these goals. This is only the second thing I have ever printed in TPU, and I chose TPU because of the durability. I would recommend this, as it also makes them dampen the sounds of pieces going in/out.
A stack of 8 of these sits at just under 3 inches (7.5 cm) tall. With the Bambu TPU I used, each bowl weighs about 1.1 ounces (33 grams).
===
I have added a thinner walls version, in case people want to use less filament, but reducing strength. Note that I have not printed the thinner wall version.
With the same print settings: Bambu Slicer claims the original would take 38g vs the thinner wall taking 30g of filament for one bowl.