Raspberry Pi 3(2) OctoPi Case with HyperPixel Touch Screen (OctoTouch)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This a remix of my old case design, this case is designed for the Pimoroni HyperPixel 4.0 screen. I've also added…
- Ocena
- 5 / 5
- Polubienia
- 69
- Pobrania
- 442
- Wydruki
- 7
- Wyświetlenia
- 3633
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This a remix of my old case design, this case is designed for the Pimoroni HyperPixel 4.0 screen. I've also added support for a fan and vents. Due to the size constraints inside the case, I could only add the standard Pi fan (30mm-30mm-10mm).
The case is designed around a Raspberry Pi 3(2). This was mainly designed as a case to sit alongside my 3D printer. Although, it can be used for anything.
Note:
My settings for supports are:
10% overhang
Interface layer
0.15 Contact Z Distance
Parts needed for assembly:
4 x 10mm silicon pads/feet/bumpers (optional)
4 x M3 x 10mm screws
4 x M3 Threaded press-fit inserts
2 x M3 x 6mm screws
Screen:
HyperPixel 4.0 - Hi-Res Display 800x480 pixels (~235 PPI)
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
No
Supports:
Yes
0.2
Infill:
15
Filament:
Prusament PLA Galaxy Black
Category: 3D Printer Accessories