Raspberry Pi 3(2) OctoPi Case with Touch Screen (OctoTouch)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have just finished designing a case for the Raspberry Pi 3(2) with a 3.5" Touchscreen. This was mainly designed as a…
- Ocena
- 4 / 5
- Polubienia
- 79
- Pobrania
- 581
- Wydruki
- 4
- Wyświetlenia
- 4843
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I have just finished designing a case for the Raspberry Pi 3(2) with a 3.5" Touchscreen. This was mainly designed as a OctoTouch/AstroTouch case. However, it can be used for anything.
Note:
Both parts are printed upside down on the build plate. My settings for supports are:
10% overhang
Interface layer
0.15 Contact Z Distance
Parts needed for assembly:
4 x 10mm silicon pads/feet/bumpers (optional)
4 x M3 x 10mm screws
4 x M3 Threaded press-fit inserts
2 x M3 x 6mm screws
Screen:
WaveShare 3.5" (A) Touchscreen 320x480
Update 16-12-2018
Increased outer hole diameter to 6mm. Update 16-09-2018
A slot has been added on the back of the case big enough for Raspberry Pi Camera Cable.Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
No
Supports:
Yes
0.2
Infill:
20%
Category: 3D Printer Accessories