Your Little Sanding Discs Drawers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mountable under plank or wall. Grit size interchangeable tags.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 28
- Wydruki
- 1
- Wyświetlenia
- 173
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
With this you will have a little holding box with drawers where you can put your sending disks. II made a little holder in the front where you can glide a little tag about the grit size. This week this way you don't need to print a new one if you change your mind. II suggest you print the little tags in another color it will be more readable.
It's designed to fit 0.2mm heigh Make it many walls like 6 and that should be sufficient. It is also aiming at requiring the least plastic possible.
I made several drawer heights for your needs. Bear inBear in mind that with my bamboo labs X1 carbon I can only print until the 7 drawers, the 8th is too heigh.
Print the tags with the number flat on the bed to give it a good quality. And if you print the drawer upside down (where the screw holes are) It will print without support or anything.
Sharing also my Fusion360 file if anybody wants to play with it. It's not really “clean” but I'm missing time to make it more parametric ;)
You need to print
- One Drawer file (chose the one with how many slots you want)
- Base Tray (one for each slots as chosen above)
- The tags you want for your grit size (ex 60, 80, 120, 180)
- Consider printing those in a different color - it's more readable.