1 / 14
Advanced Logs (+100 Parts!) (12.5 diameter custom Lincoln Logs) — zdjęcie 1
1 / 14

Advanced Logs (+100 Parts!) (12.5 diameter custom Lincoln Logs)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Custom made, free use, lincoln log based timber parts with multiple variations.

Ocena
0 / 5
Polubienia
11
Pobrania
60
Wydruki
0
Wyświetlenia
2080
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Building Toys
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Introduction

When I met Lincoln Logs, I got the urge to play with them, however, they are really expensive, forcing me to look for other options.

However, the models I found weren't many, and did not take the full potential that these timbers possesed, so I made these files for anyone to use, to enjoy these toys.

Contents

The files include:

  • Logs: The usual parts, includes the regular distribuition of notches, some that are fully flat except the tips, and some that have lots of intermitent notches.
  • Half Logs: All of the logs, but in half for bulding bases, floors or roofs.
  • Planks: Simple pieces that are made for floors or roofs.
  • Plates: Custom studded plates for building bases or roofs.
  • Roofs: Custom trusses of varying sizes and heigths, to allow many options.
  • Chimneys: Few chimneys to detail your builds.
  • Fillers: Diverse framed parts, like windows, doors and frames, to fill gaps and extend walls.

All of these parts are organized on many folders with the respecting names, to ease the printing and building experience.

Also, the zip on the “Other Files” includes a guide for the chimneys. presenting their correct trusses.

Terminology

These files could have unusual names, and I'm going to explain them quickly for you to use the files easily (especially to those using the scrambled folder)

# (only for explanation) = Number
#s = Number of 12.5mm x12.5mm notches on the part (Attachment-Length Measure)
#in = 1in=25, amount of 25 mm segments of the part (Length Measure)
#x# (Plates) = X amount of studs by Y amount of studs (Size Measure)
#l = Amount of logs high(12.5mm), minus 3.125mm (Quarter log)
#/# = Proportion of the length of both of the axis (Y and Z) of the slope

Logs-Half Logs : “#s #in log/half”
Planks : “#in plank”
Plates : “#x# plate”
Roof → Single: “#s_#in #l (Long)SingleTruss”
            Modular:"#s x #l (Long)Side/MiddleTruss" *
Fillers → Fillers : “#s filler”
                 Frames : "#x#s Frame" **
 Doors and Windows : “#x#s  (Double)Door/Window” ***
Chimneys : “#/# Chimney” ****
Diagonal: “Left/Right Diagonal Log #in”

*There's no LongMiddleTruss
**Frame size is measured by the inner ouside ring of the parts (the one behind the lips)
*** Door size is catalogued by the frame it fits (Regular Doors/Windows), or named half of the Y measure (#s) of the correct frame (Double Doors)
**** Chimneys are all 18.75mm long, 18.75mm thick and their height is always 18.75 over teh vertex, and the heigth below that may vary.

Credits

The modular roof base was made by pocket83, link to his video.
The parts were modeled in Blender.
The intercahngeable frame sistem is base off LEGO doors and windows.

Extras

My printer doesn't work currrently, so please excuse the Blender screenshots
These are NOT compatible with Lincoln logs, however maybe if you rescale them it may work.
Also, english is my second language, so sorry if the text is kinda scuffed.
There are two files, the one on Other Files is more structurated and organized that the one on Model Files, though both have the same models
The STLs aren't optimized for printing, you wil have to rotate them yourself.

Thank you for printing this, and hope you enjoy it!

Tagi