Flexible SUNLU Filament Spool Adapter (73mm to 51mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter for SUNLU spool (73mm center) use with e.g. PRUSA spool holder (51mm center). Flexible design for good fit.
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 101
- Wydruki
- 1
- Wyświetlenia
- 402
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
The SUNLU filament spools (~73mm center hole) have slightly different diameters on their left and right side.
This makes adapters with fixed diameter to fit very tight (hard to remove again) or too loose, so they can slip out while printing.
The flexible design of this adapter allows a good fit of the adapter on any side of the spool, as it compensates small variations in diameter.
Also removal after usage is fairly easy.
Printed with
- SUNLU PETG on a MK3S+ with MMU2S (single color only)
- no supports needed
- brim is optional and might not be required