Corne All in One Case with MagSafe ring placement!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An all in one Corne Case
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 1395
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
This my third version of my Corne Case, it features:
- Low profile
- No stand-offs needed
- built in pocket for larger battery (can be modified)
- MagSafe ring placement geometry
The only thing you need is 4-7 M2 screws (depending on how secure you want it. i personally use 4).
You can either use shorter screws and plug up the bottom M2 hex nut holes and just screw into the plastic with up to 8mm screws.
Or, you can use 10mm M2 screws and M2 nuts and fasten them together.
Optionally, you can color the .1 mm magsafe ring geometry on the bottom a different color to the case, making it easy to place the magsafe ring on the exact same spot on both halves. (see picture of model in slicer)
If you don't have some Adhesive Magsafe rings laying around from magsafe products, you can get some on AliExpress or Amazon.