1 / 5
Nabíjecí stojan pro hodinky Madvell / Madvell watch charging stand — zdjęcie 1
1 / 5

Nabíjecí stojan pro hodinky Madvell / Madvell watch charging stand

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Nabíjecí stojan pro hodinky Madvell / Madvell watch charging stand

Ocena
0 / 5
Polubienia
0
Pobrania
29
Wydruki
0
Wyświetlenia
127
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Dvoudílný stojánek pro hodinky Madvell. Podpěru je potřeba použít pouze u stojanu. Vytištěno s PLA 15% výplň. Horní část se nasadí na čep stojanu. Je to těsné, tak záleží na nastavení tiskárny.

Two-piece stand for Madvell watches. The support needs to be used only with the stand. Printed with PLA 15% infill. The upper part is placed on the pin of the stand. It's tight, so it depends on the printer settings.

Tagi