Divider (Print-in-Place Compass Remix)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A friend of mine is somewhat obsessed with dividers (in a manner similar to the author of this piece:…
- Ocena
- 4,667 / 5
- Polubienia
- 31
- Pobrania
- 174
- Wydruki
- 3
- Wyświetlenia
- 1312
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
A friend of mine is somewhat obsessed with dividers (in a manner similar to the author of this piece: https://bigjumppress.wordpress.com/2014/09/30/divide-my-heart-an-ode-to-my-favorite-tool/), so I adapted LoboCNC's excellent print in place compass so that it measures and transfers distance rather than drawing circles. It was a simple matter to mirror the pointed end in Openscad so that both arms are symmetrical.
The only improvement I can think of is adding holes for sewing pins or something so that it will actually stab through papers rather than indent.
Print instructions
Category: Tools Print Settings
Printer: Reach 3D
Rafts: Doesn't Matter
Supports: Yes
Resolution: .2
Infill: 20
Notes:
It's necessary to go super slow. so that it doesn't lock up. I printed at 30mm/s for both perimeters and infill with the extrusion percentage cranked down to 93%. I also lowered the temperature to 190 in order to theoretically limit layer adhesion. It took a lot of patience and careful wiggling to initially get it moving, but it's worth the effort.