1 / 6
Original Prusa Mini Enclosure (OPME) cardboard packing box Cat scratch pad — zdjęcie 1
1 / 6

Original Prusa Mini Enclosure (OPME) cardboard packing box Cat scratch pad

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Upcycled my Original Prusa MINI Enclosure cardboard packing to make a scratch pad for my cat.

Ocena
0 / 5
Polubienia
7
Pobrania
35
Wydruki
0
Wyświetlenia
832
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Pets
Licencja
Creative Commons — Attribution — Share Alike

I had the idea to recycle my Original Prusa Mini Enclosure cardboard packing box into a cat scratching pad.

I added some leftover Ice Hockey carbon sticks that I cut to size to create a frame. Fixed together using metal angle brackets  but I could upgrade later using 3D printed brackets.
Wooden frame will also work.

I then put some felt pads on the underside to finish it.

 

My cat is LOVING it !

I added just a touch of catnip on the cardboard but not sur that it was needed.
I put a picture of the damages after some days.

 

Size and cuts

Overall dimensions (assembled) are 585 x 165 x 30 mm.

Cardboard cuts

  • 22 trips of 30 x 545 mm (longer packing box side).

Frame cuts

  • 2 x 540 mm long carbon fiber rectangle tube (~ 30 x 22 mm)
  • 2 x 155 mm short carbon fiber rectangle tube (~ 30 x 22 mm)

 

Assembling

I cut the short carbon fiber frame sides smaller than the overall width to ensure some compression of the cardboard strips.
No need to glue them. Friction keeps everything tight.

Tagi