Baby Yoda headBand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Basically this is the baby yoda's ears on a headband (for cosplay of course).Headband has been enlarged to accomodate…
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 177
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution
Basically this is the baby yoda's ears on a headband (for cosplay of course).
Headband has been enlarged to accomodate the ears (15mm) The ears thickness has been slightly reduced (aspect ratio is not right then). I also reduced mesh resolution in order to work with the ears, but not to a point it can be seen IMHO.
The ears are meant to be screwed on the head band for toughness. The headband is 130mm in diameter approx, which is just a bit too large for my two years old child.
The original designer of yoda's ears said : "THIS MODEL IS NOT INTENDED FOR RESALE! (Please don't let me find it on Etsy or Ebay.)". As this design use some part of it, the same apply.
I'll post more pictures once it is painted and finished
Modeled using TopSolid V7.13
I have attached the Step files and TopSolid package. Beware, the ears original design was not meant to be reworked in a mechanical design software. Some software, or pc configuration might have a tough time manipulating these meshes.
To be printed in green !!!
Category: Costume