1 / 5
Elegoo giga storm spool holder extrusion mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
We needed to relocate the original spool holder so we designed this option
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 167
- Wydruki
- 0
- Wyświetlenia
- 767
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Standard Digital File License
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (11)Powiązane
We needed to change the position of the spool-holder, because our printer is sitting in the corner. So we designed this mount for the original spool-holder and runout sensor.
Nothing else is needed and you can use the original screws. Install on the top extrusions and it is movable. Explanation video on Tiktok → click here
Printed in Elegoo Rapid PETG white 0.16mm layer, 6 walls, 6 top and bottom and 25% gyroid infill