1 / 2
Shop Vac Hose To 2x4 & 2x6 Hole Shroud — zdjęcie 1
1 / 2

Shop Vac Hose To 2x4 & 2x6 Hole Shroud

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Drill a hole for electrical wire in the center of your 2x4 & 2x6 wall without any wood chips!

Ocena
0 / 5
Polubienia
0
Pobrania
6
Wydruki
0
Wyświetlenia
60
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I got tired of cleaning up tons of wood chips after only a few holes when running electrical wires.

Printed out of 95a TPU so it wouldn't immediately crack the first time it got bumped around. These are a bit of a consumable as a spade bit will eventually eat into the sides depending on how fast & careful you are.

Model editable directly in onshape.com

Tagi