1 / 4
Bike Pannier Ortlieb QL2.1 replacement spacer with anti-slip collar 12/10/8mm — zdjęcie 1
1 / 4

Bike Pannier Ortlieb QL2.1 replacement spacer with anti-slip collar 12/10/8mm

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Spacer with a little collar to prevent the spacer slipping through the pannier mount. For QL2.1, all sizes.

Ocena
0 / 5
Polubienia
7
Pobrania
84
Wydruki
0
Wyświetlenia
267
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

I lost a few spacers because my bike rack has a little nose which pushes the spacers through the mounting on the panniers when it gets bumpy. My solution is a small collar, which prevents the slipping of the spacer. Works very well and is probably a solution to some problems with slipping spacers out there.

Print two for one pannier, don't forget to mirror one.

Printed in PETG, print with collar on buildplate, use supports for the little “arm”.

Tagi